Wide Range of Essential Components
A product approach suitable for evaluating maintenance requirements in door systems, motion, safety and control groups from a single source.
Modernization
Elevator Spare Part Solutions
The right part. The right fit. Uninterrupted operation.
Spare part solutions for maintenance, renewal, modernization and service requirements of elevator systems, particularly door mechanisms, can be selected according to product code and technical requirements to match different brands, models and application types. Using the correct spare part is important for maintaining system performance and making service processes more efficient.
Selection by model / product code
New and modernization projects
Technical sales support
Performance- and Compatibility-Focused Selection
Part matching that supports reliable operation and service continuity through the correct product code, mechanism type and application information.
Component Groups
Quickly reach the right product group according to service and modernization requirements.
Evaluate spare part selection not only by product name, but together with door type, opening direction, mechanism series and usage scenario.
EN 81-20
Defines the fundamental safety requirements for the design, manufacture and installation of passenger and goods lifts.
EN 81-50
Covers design rules, calculations, tests and verification methods for lift components.
Drive and Motion
Defines the requirements for two-way emergency communication systems for passengers trapped in a lift.
Safety Equipment
Defines the conditions required for accessible lift use by disabled persons and persons with reduced mobility.
EN 81-72
Defines the design and safety requirements for firefighter lifts.
EN 81-73
Defines lift behavior during a fire alarm or fire condition, including return-to-designated-floor functions.
EN 81-58
Covers fire-resistance tests for lift landing doors. The E, EW and EI classifications are evaluated within this standard.
EN 81-77
Defines seismic design and safety requirements for lifts used in areas with earthquake risk.
EN 81-21
Defines alternative safety solutions for new lifts installed in existing buildings where standard headroom or pit dimensions cannot be achieved.
EN 81-80
Defines improvements intended to raise the safety level of existing and older lifts.
Control and HMI
Defines design and equipment requirements for vandal-resistant lifts.
EN 81-40
Covers safety requirements for stairlifts and inclined lifting platforms intended for persons with reduced mobility.
EN 81-41
Defines safety requirements for vertical lifting platforms intended for use by disabled persons.
EN 81-42
Covers safety requirements for enclosed-car vertical lifting platforms and certain low-speed access solutions.
EN 115-1
Covers design, manufacture and installation safety requirements for new escalators and moving walks.
EN 115-2
Defines requirements for improving the safety level and modernization of existing escalators and moving walks.
Featured Spare Parts
Filter door system spare parts by code and mechanism type.
20 products shown (61–80 / 81)
Door Systems
Elevator Door System Component
Mikrolift Door Control Board
Mikrolift Door Control Board is an electrical/electronic component used for…
Door Systems
Elevator Door System Component
MN2 / MIM1 Door Switch
MN2 / MIM1 Door Switch is an electrical/electronic component used for…
Door Systems
Elevator Door System Component
Long Panel Hanger Set
Long Panel Hanger Set is a mechanical component used to support, position…
Door Systems
Elevator Door System Component
Plastic Hook Roller
Plastic Hook Roller is a mechanical or drive component supporting generation…
Door Systems
Elevator Door System Component
X Model Plastic Door Guide Shoe
X Model Plastic Door Guide Shoe is a mechanical component used to support…
Door Systems
Elevator Door System Component
Plastic Door Ramp
Plastic Door Ramp is a component used in the door locking, coupling, return…
Door Systems
Elevator Door System Component
Plastic Door Buffer
Plastic Door Buffer is a component used in the door locking, coupling…
Door Systems
Elevator Door System Component
Elevator Door System Power Supply
Elevator Door System Power Supply is an electrical/electronic component used…
Door Systems
Elevator Door System Component
Bearing Hook Roller
Bearing Hook Roller is a mechanical or drive component supporting generation…
Door Systems
Elevator Door System Component
Automatic Elevator Cabin Door Motor Kormas
Automatic Elevator Cabin Door Motor Kormas is a mechanical or drive component…
Door Systems
Elevator Door System Component
Automatic Elevator Door Motor SSA
Automatic Elevator Door Motor SSA is a mechanical or drive component…
Door Systems
Elevator Door System Component
Single-Channel Aluminum Elevator Door Sill
Single-Channel Aluminum Elevator Door Sill is an auxiliary component used for…
Door Systems
Elevator Door System Component
Semi-Automatic Telescopic 2-Panel Cabin Door Mechanism
Semi-Automatic Telescopic 2-Panel Cabin Door Mechanism is a door-system…
Door Systems
Elevator Door System Component
Semi-Automatic Telescopic 3-Panel Cabin Door Mechanism
Semi-Automatic Telescopic 3-Panel Cabin Door Mechanism is a door-system…
Door Systems
Elevator Door System Component
Z74 Female Plug Contact
Z74 Female Plug Contact is an electrical/electronic component used for…
Door Systems
Door Locks
ON-03 Double Safety Elevator Door Lock
ON-03 is a double safety door lock model for elevator door systems. Review…
Door Systems
Door Locks
ON-04 Double Safety Elevator Door Lock
ON-04 is a double safety door lock model for elevator door systems. Review…
Door Systems
Pump
ON-01 Elevator Landing Door Retiring Cam
ON-01 is an electromechanical retiring cam for the elevator landing door…
Door Systems
Pump
ON-05 Elevator Landing Door Retiring Cam
ON-05 is an electromechanical retiring cam for the elevator landing door…
Door Systems
Door Dictators / Closers
ONA-01 Elevator Door Damper
ONA-01 is a damper model for elevator door mechanisms. Compare the body…
No products matching your search criteria were found.
Correct Part Selection
Verify not only the part, but also system compatibility.
During the service process, sharing the product code, series, opening type and existing mechanism information together makes correct matching easier.
Identify the Product Code
Note the code on the label, mechanism or existing part.
Verify the Door Type
Identify whether it is car/landing and center-/side-opening.
Share Photos and Dimensions
If necessary, send a photo and the basic dimensions of the existing part.
Let Us Match the Compatible Part
Our technical team can guide you to the suitable option according to the product and application information.